I would like to setup my Outlook 2003 to RPC over HTTP. I have Outlook Web
Access and for various reasons would like to be able to access it through my
Outlook as opposed to through IE.

If you could list steps required to set this up I would appreciate it.

You should check with your corporate IT folks (or Exchange provider) if they
support RPC over HTTPS. If they do, they will be able to provide all info
necessary to configure.

"CJZ" wrote in message
...
I would like to setup my Outlook 2003 to RPC over HTTP. I have Outlook Web
Access and for various reasons would like to be able to access it through
my
Outlook as opposed to through IE.

If you could list steps required to set this up I would appreciate it.

they provided me with the Exchange Proxy Server and confirmed that they are
RPC over HTTP ready ... I was just wondering how I would set up Outlook

"neo [mvp outlook]" wrote:

You should check with your corporate IT folks (or Exchange provider) if they
support RPC over HTTPS. If they do, they will be able to provide all info
necessary to configure.

"CJZ" wrote in message
...
I would like to setup my Outlook 2003 to RPC over HTTP. I have Outlook Web
Access and for various reasons would like to be able to access it through
my
Outlook as opposed to through IE.

If you could list steps required to set this up I would appreciate it.

If you have remote web workplace access, sign in and there are detailed
instructions on the right side. If not, let me know and I'll email them to
you.
--
Mike S.


"CJZ" wrote:

they provided me with the Exchange Proxy Server and confirmed that they are
RPC over HTTP ready ... I was just wondering how I would set up Outlook

"neo [mvp outlook]" wrote:

You should check with your corporate IT folks (or Exchange provider) if they
support RPC over HTTPS. If they do, they will be able to provide all info
necessary to configure.

"CJZ" wrote in message
...
I would like to setup my Outlook 2003 to RPC over HTTP. I have Outlook Web
Access and for various reasons would like to be able to access it through
my
Outlook as opposed to through IE.

If you could list steps required to set this up I would appreciate it.

detailed instructions... I must be blind cause I don't see any... I have
followed the instructions at
http://office.microsoft.com/en-us/or...402731033.aspx but still can't
seem to get it to work... I have a feeling it may not be set up on the
Exchange side despite the Exchange Admin claiming it is..

"Mike_S" wrote:

If you have remote web workplace access, sign in and there are detailed
instructions on the right side. If not, let me know and I'll email them to
you.
--
Mike S.


"CJZ" wrote:

they provided me with the Exchange Proxy Server and confirmed that they are
RPC over HTTP ready ... I was just wondering how I would set up Outlook

"neo [mvp outlook]" wrote:

You should check with your corporate IT folks (or Exchange provider) if they
support RPC over HTTPS. If they do, they will be able to provide all info
necessary to configure.

"CJZ" wrote in message
...
I would like to setup my Outlook 2003 to RPC over HTTP. I have Outlook Web
Access and for various reasons would like to be able to access it through
my
Outlook as opposed to through IE.

If you could list steps required to set this up I would appreciate it.

To use Outlook via the InternetEnsure that the following requirements have
been met on the client computer:

Verify that the computer is running Microsoft Windows XP Service Pack 1 or
later
Click Start, right-click My Computer, and then click Properties.
The version of the operating system and service pack is displayed under
System. If you do not see a service pack version, there is no service pack
installed.
Verify that Windows update Q331320 is installed on the computer (not
required if you are running Windows XP Service Pack 2 or later)
Click Start, click Control Panel, and then open Add or Remove Programs.
Under Currently installed programs, search for the item Windows XP Hotfix
(SP2) Q331320.
If the item is not present, go to the Microsoft Web site
(http://go.microsoft.com/fwlink/?LinkId=18651) and follow the instructions to
download and install it.
Verify that the computer is running Outlook 2003 or later
Open Outlook.
Click the Help menu, and then click About Microsoft Office Outlook. The
version number appears at the top of the box.
Verify that the computer trusts the certificate used by the server
Open Internet Explorer, and then in the address bar type:
https://mail.domain.com/remote


If the certificate is trusted, a certificate warning does not appear. In
this case, continue with step 1 under Ensure that you have an Outlook profile
configured for the server.
If the certificate is not trusted, a warning appears. Click View
Certificate, click Install Certificate, and then follow the instructions.
Ensure that you have an Outlook profile configured for the server
Click Start, and then click Control Panel.
If you are viewing Control Panel in the default Category view, switch to
Classic view, and then double-click Mail.
If you are viewing Control Panel in Classic view, double-click Mail.
In the Mail Setup dialog box, click Show Profiles. If your profile appears
in the list, select your profile, click Properties, click E-mail Accounts,
select View or change existing e-mail accounts, and then click Next. If your
profile does not appear, open Outlook and follow the instructions to create a
profile before proceeding.
If Microsoft Exchange Server does not appear in the list, the existing
profile is not associated with a Microsoft Exchange Server e-mail account.
Click Cancel, and then click Close. Continue with step 3 to add a profile.
If there is an existing Microsoft Exchange Server profile, continue with
step 3 under Configure the computer for RPC over HTTP.
Click Add. The New Profile dialog box appears.
In the Profile Name box, type a name for the new profile, and then click OK.
The E-mail Accounts dialog box appears.
Under E-mail, select Add a new e-mail account, and then click Next. The
Server Type dialog box appears.
Click Microsoft Exchange Server, and then click Next.
Continue with step 4 under Configure the computer for RPC over HTTP.
Configure the computer for RPC over HTTP
Click Start, and then click Control Panel.
If you are viewing Control Panel in the default Category view, switch to
Classic view, and then double-click Mail.
If you are viewing Control Panel in Classic view, double-click Mail.
In the Mail Setup dialog box, click E-mail accounts, click View or change
existing e-mail accounts, and then click Next.
In the E-mail accounts dialog box, click Microsoft Exchange Server, and then
click Change.
In the Microsoft Exchange Server box, type the local name of the Exchange
server:
servername.domain.local


In the User Name box, type the user name that you use to log on to the
Remote Web Workplace. Do not click Check Name.

In the Exchange Server settings page, click More Settings.
On the Connection tab, under Exchange over the Internet, select Connect to
my Exchange mailbox using HTTP, and then click Exchange Proxy Settings. The
Exchange Proxy Settings dialog box appears.
Under Use this URL to connect to my proxy server for Exchange, type the
following URL:
mail.domain.com

Select Connect using SSL only, and then select Mutually authenticate the
session when connecting with SSL.
In the Principal name for proxy server box, type the following text:
msstd:mail.domain.com

Select On slow networks, connect using HTTP first, then connect using TCP/IP.
Under Proxy authentication settings, select Basic Authentication.
Click OK, and then click OK again. Click Next, and then click Finish. Click
Close.
In the Mail dialog box, if Always use this profile is selected, choose the
newly configured profile.
Open Outlook and type your Windows Small Business Server user name (in the
format ADDYCO\user name) and password. You can now work with your Outlook
mailbox.

--
Mike S.


"CJZ" wrote:

detailed instructions... I must be blind cause I don't see any... I have
followed the instructions at
http://office.microsoft.com/en-us/or...402731033.aspx but still can't
seem to get it to work... I have a feeling it may not be set up on the
Exchange side despite the Exchange Admin claiming it is..

"Mike_S" wrote:

If you have remote web workplace access, sign in and there are detailed
instructions on the right side. If not, let me know and I'll email them to
you.
--
Mike S.


"CJZ" wrote:

they provided me with the Exchange Proxy Server and confirmed that they are
RPC over HTTP ready ... I was just wondering how I would set up Outlook

"neo [mvp outlook]" wrote:

You should check with your corporate IT folks (or Exchange provider) if they
support RPC over HTTPS. If they do, they will be able to provide all info
necessary to configure.

"CJZ" wrote in message
...
I would like to setup my Outlook 2003 to RPC over HTTP. I have Outlook Web
Access and for various reasons would like to be able to access it through
my
Outlook as opposed to through IE.

If you could list steps required to set this up I would appreciate it.