Outlook 2007 \ Contacts - Group ... possible glitch?
 

I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when closing
the Group Contact. If I reopen the Group Contact I see the changes that I
made (but did not save). I am prompted to Save or Cancel the 'changes' yet
again and again I Cancel.

The only way to view the Group Contact without those changes is to open yet
another Contact and then go back to the Group Contact in question. I now
see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Outlook 2007 \ Contacts - Group ... possible glitch?
 

I should add this - I was showing my wife how Contact \ Groups work since
she has experienced problems with a particular Group. She will send a
'Group mailing' but does not wish everyone to receive the message. She has
on occassion deleted members in Contact \ Group instead of deleting the
members in question _after_ expanding the Group in the e-mail message
itself. I showed her today what would happen and that's when I 'discovered'
this possible glitch.

Thanks, DH




"Dave Horne" wrote in message
...
I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when closing
the Group Contact. If I reopen the Group Contact I see the changes that I
made (but did not save). I am prompted to Save or Cancel the 'changes'
yet again and again I Cancel.

The only way to view the Group Contact without those changes is to open
yet another Contact and then go back to the Group Contact in question. I
now see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Outlook 2007 \ Contacts - Group ... possible glitch?
 

"Dave Horne" wrote in message
...
I should add this - I was showing my wife how Contact \ Groups work since
she has experienced problems with a particular Group. She will send a
'Group mailing' but does not wish everyone to receive the message. She
has on occassion deleted members in Contact \ Group instead of deleting
the members in question _after_ expanding the Group in the e-mail message
itself. I showed her today what would happen and that's when I
'discovered' this possible glitch.

Thanks, DH


Outlook (up until and including 2007) doesn't USE "groups" - what exactly
are you talking about?

Outlook 2007 \ Contacts - Group ... possible glitch?
 

"Dave Horne" wrote in message
...

I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when closing
the Group Contact. If I reopen the Group Contact I see the changes that I
made (but did not save). I am prompted to Save or Cancel the 'changes' yet
again and again I Cancel.

The only way to view the Group Contact without those changes is to open yet
another Contact and then go back to the Group Contact in question. I now
see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Are you referring to a Distribution List? Exactly how are you making the
changes? Describe the steps.
--
Brian Tillman [MVP-Outlook]

Outlook 2007 \ Contacts - Group ... possible glitch?
 

Yea, it's a Distribution List, sorry. What I did was this - I removed a
member or two (or more) from the list in question and then changed my mind.
I go to close the list and am prompted to Save changes or Cancel. I cancel.
If I reopen the Distribution List the 'changes' I made, though did not save,
are displayed. When I exit that list, I am again prompted to Save or
Cancel, and again I cancel. I then reopen the list and still see the
changes I made though did not save.

The only way to 'correct' this situation I''ve found is to open yet another
Contact and then go back to the original list and then I see the list as it
should appear.

The only reason I stumbled upon this, I was showing my wife how a
Distribution List works since she has had problems working with it. I was
surprised to stumble upon this.

So, try this - create (or use an exisitng Distribution List), remove a
member or two or three, exit the List but do not Save, reopen the List and
see if you had the same experience as I.

Thanks, Dave Horne


"Brian Tillman [MVP-Outlook]" wrote in message
...
"Dave Horne" wrote in message
...

I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when closing
the Group Contact. If I reopen the Group Contact I see the changes that
I made (but did not save). I am prompted to Save or Cancel the 'changes'
yet again and again I Cancel.

The only way to view the Group Contact without those changes is to open
yet another Contact and then go back to the Group Contact in question. I
now see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Are you referring to a Distribution List? Exactly how are you making the
changes? Describe the steps.
--
Brian Tillman [MVP-Outlook]

Outlook 2007 \ Contacts - Group ... possible glitch?
 

Gordon, sorry, I meant to write Distribution List, sorry.

Dave Horne


"Gordon" wrote in message
...

"Dave Horne" wrote in message
...
I should add this - I was showing my wife how Contact \ Groups work since
she has experienced problems with a particular Group. She will send a
'Group mailing' but does not wish everyone to receive the message. She
has on occassion deleted members in Contact \ Group instead of deleting
the members in question _after_ expanding the Group in the e-mail message
itself. I showed her today what would happen and that's when I
'discovered' this possible glitch.

Thanks, DH


Outlook (up until and including 2007) doesn't USE "groups" - what exactly
are you talking about?

Outlook 2007 \ Contacts - Group ... possible glitch?
 

DL's behave behave very erratically and have never been reliable. Few of us
even use them for that reason. Behavior will vary depending on whether you
base them on underlying Contacts in your Folder and whether those Contact
were created in the same Folder where they now reside (if you ever migrated
your data, for example, as most of us have, DL's will behave unpredictably).
You'd do will to use alternatives like the rest of us do. If you rely on
DL's, you'll regret it.
--
Russ Valentine
"Dave Horne" wrote in message
...
Yea, it's a Distribution List, sorry. What I did was this - I removed a
member or two (or more) from the list in question and then changed my
mind. I go to close the list and am prompted to Save changes or Cancel. I
cancel. If I reopen the Distribution List the 'changes' I made, though did
not save, are displayed. When I exit that list, I am again prompted to
Save or Cancel, and again I cancel. I then reopen the list and still see
the changes I made though did not save.

The only way to 'correct' this situation I''ve found is to open yet
another Contact and then go back to the original list and then I see the
list as it should appear.

The only reason I stumbled upon this, I was showing my wife how a
Distribution List works since she has had problems working with it. I was
surprised to stumble upon this.

So, try this - create (or use an exisitng Distribution List), remove a
member or two or three, exit the List but do not Save, reopen the List and
see if you had the same experience as I.

Thanks, Dave Horne


"Brian Tillman [MVP-Outlook]" wrote in message
...
"Dave Horne" wrote in message
...

I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when
closing the Group Contact. If I reopen the Group Contact I see the
changes that I made (but did not save). I am prompted to Save or Cancel
the 'changes' yet again and again I Cancel.

The only way to view the Group Contact without those changes is to open
yet another Contact and then go back to the Group Contact in question.
I now see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Are you referring to a Distribution List? Exactly how are you making the
changes? Describe the steps.
--
Brian Tillman [MVP-Outlook]

Outlook 2007 \ Contacts - Group ... possible glitch?
 

Russ, thanks for the info! All the best, Dave Horne



"Russ Valentine" wrote in message
...
DL's behave behave very erratically and have never been reliable. Few of
us even use them for that reason. Behavior will vary depending on whether
you base them on underlying Contacts in your Folder and whether those
Contact were created in the same Folder where they now reside (if you ever
migrated your data, for example, as most of us have, DL's will behave
unpredictably).
You'd do will to use alternatives like the rest of us do. If you rely on
DL's, you'll regret it.
--
Russ Valentine
"Dave Horne" wrote in message
...
Yea, it's a Distribution List, sorry. What I did was this - I removed a
member or two (or more) from the list in question and then changed my
mind. I go to close the list and am prompted to Save changes or Cancel.
I cancel. If I reopen the Distribution List the 'changes' I made, though
did not save, are displayed. When I exit that list, I am again prompted
to Save or Cancel, and again I cancel. I then reopen the list and still
see the changes I made though did not save.

The only way to 'correct' this situation I''ve found is to open yet
another Contact and then go back to the original list and then I see the
list as it should appear.

The only reason I stumbled upon this, I was showing my wife how a
Distribution List works since she has had problems working with it. I
was surprised to stumble upon this.

So, try this - create (or use an exisitng Distribution List), remove a
member or two or three, exit the List but do not Save, reopen the List
and see if you had the same experience as I.

Thanks, Dave Horne


"Brian Tillman [MVP-Outlook]" wrote in message
...
"Dave Horne" wrote in message
...

I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when
closing the Group Contact. If I reopen the Group Contact I see the
changes that I made (but did not save). I am prompted to Save or
Cancel the 'changes' yet again and again I Cancel.

The only way to view the Group Contact without those changes is to open
yet another Contact and then go back to the Group Contact in question.
I now see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Are you referring to a Distribution List? Exactly how are you making
the changes? Describe the steps.
--
Brian Tillman [MVP-Outlook]

Outlook 2007 \ Contacts - Group ... possible glitch?
 

One more thing - I keep writing that I clicked on 'Cancel' when exiting the
list, what I should have written was I clicked on 'No' when asked if I
wanted to save the chnages I made.

.... sorry 'bout that. DH




"Brian Tillman [MVP-Outlook]" wrote in message
...
"Dave Horne" wrote in message
...

I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when closing
the Group Contact. If I reopen the Group Contact I see the changes that
I made (but did not save). I am prompted to Save or Cancel the 'changes'
yet again and again I Cancel.

The only way to view the Group Contact without those changes is to open
yet another Contact and then go back to the Group Contact in question. I
now see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Are you referring to a Distribution List? Exactly how are you making the
changes? Describe the steps.
--
Brian Tillman [MVP-Outlook]

Outlook 2007 \ Contacts - Group ... possible glitch?
 

The only thing that might work with a DL is to use the "Update Now" button.
It works about 30% of the time.
--
Russ Valentine
"Dave Horne" wrote in message
...
One more thing - I keep writing that I clicked on 'Cancel' when exiting
the list, what I should have written was I clicked on 'No' when asked if I
wanted to save the chnages I made.

... sorry 'bout that. DH




"Brian Tillman [MVP-Outlook]" wrote in message
...
"Dave Horne" wrote in message
...

I've been using Outlook for many years. Just now I 'removed' several
members from a Group Contact but _did not_ save the changes when
closing the Group Contact. If I reopen the Group Contact I see the
changes that I made (but did not save). I am prompted to Save or Cancel
the 'changes' yet again and again I Cancel.

The only way to view the Group Contact without those changes is to open
yet another Contact and then go back to the Group Contact in question.
I now see the unchanged (and original) Group Contact.

What am I not understanding here? Also, if this is a known issue, my
apologies in advance for taking up your time. Thanks, Dave Horne

Are you referring to a Distribution List? Exactly how are you making the
changes? Describe the steps.
--
Brian Tillman [MVP-Outlook]