A Microsoft Outlook email forum. Outlook Banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Outlook Banter forum » Microsoft Outlook Email Newsgroups » Outlook - General Queries
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Tags: , , ,

New Machine, from Outlook 2003 to 2007





 
 
Thread Tools Display Modes
  #1  
Old March 16th 07, 05:04 PM posted to microsoft.public.outlook.general,microsoft.public.outlook.contacts,microsoft.public.outlook
Jason
external usenet poster
 
Posts: 7
Default New Machine, from Outlook 2003 to 2007

Hello,
I am having an issue that I would imagine others have had too, but I'm
unable to find a solution on the newsgroups or internet. Here is the
situation:

* My old laptop was XP with Outlook 2003
* I have just received a new laptop with Vista and Outlook 2007
* On my old laptop, i have MANY email addresses that are NOT saved as
contacts, but that would auto-fill for me when I began to type their name in
Outlook 2003
* Now on my new laptop, Outlook 2007 doesn't have that same auto-fill list
so I've lost those email addresses

When I moved from Outlook 2003 to 2003 before, I just copied over the .NK2
file and all worked fine (the autofill addresses showed up on the new
machine). Now it appears Outlook 2007 uses a different mechanism and
doesn't recongize/use my old .NK2 file.

Is there anyway possible I can get my autofill list from Outlook 2003 to my
new machine using Outlook 2007? I don't want to have to save these all as
contacts just to migrate them...any ideas?

Jason


Ads
  #2  
Old March 16th 07, 05:13 PM posted to microsoft.public.outlook.general,microsoft.public.outlook.contacts,microsoft.public.outlook
Diane Poremsky [MVP]
external usenet poster
 
Posts: 5,541
Default New Machine, from Outlook 2003 to 2007

I believe it's the same - allow outlook 2007 to create an nk2 file, close
outlook and locate the nk2 then replace it with the old one, making sure the
file name is identical. If not, rename the old one so it replaces the new
one.

Now... if the problem is that outlook doesn't seem to be using any NK2 and
starts with a blank slate everytime, outlook 2007 is not closing properly.
Once it closes completely the NK2 will work when it reopens.

--
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Need Help with Common Tasks? http://www.outlook-tips.net/beginner/
Outlook 2007: http://www.slipstick.com/outlook/ol2007/

Outlook Tips by email:


Outlook Tips:
http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com
Subscribe to Exchange Messaging Outlook newsletter:



"Jason" wrote in message
...
Hello,
I am having an issue that I would imagine others have had too, but I'm
unable to find a solution on the newsgroups or internet. Here is the
situation:

* My old laptop was XP with Outlook 2003
* I have just received a new laptop with Vista and Outlook 2007
* On my old laptop, i have MANY email addresses that are NOT saved as
contacts, but that would auto-fill for me when I began to type their name
in Outlook 2003
* Now on my new laptop, Outlook 2007 doesn't have that same auto-fill list
so I've lost those email addresses

When I moved from Outlook 2003 to 2003 before, I just copied over the .NK2
file and all worked fine (the autofill addresses showed up on the new
machine). Now it appears Outlook 2007 uses a different mechanism and
doesn't recongize/use my old .NK2 file.

Is there anyway possible I can get my autofill list from Outlook 2003 to
my new machine using Outlook 2007? I don't want to have to save these all
as contacts just to migrate them...any ideas?

Jason



  #3  
Old March 16th 07, 05:24 PM posted to microsoft.public.outlook.general,microsoft.public.outlook.contacts,microsoft.public.outlook
Jason
external usenet poster
 
Posts: 7
Default New Machine, from Outlook 2003 to 2007

Never mind, I finally figured it out. For those who need to do the same:

On the XP/Outlook 2003 machine:
1. Navigate to C:\Documents and Settings\username\Application
Data\Microsoft\Outlook
2. Locate the .NK2 file in this directory and copy or move it to the Vista
machine

On the Vista/Outlook 2007 machine:
1. Close Outlook and navingate to
C:\users\username\appdata\roaming\microsoft\outloo k
2. Rename the existing .NK2 file by changing the extension of the filename
(.NK3 for example)
3. Rename the file you moved from the XP machine to be the same as the file
noted in step 2 (with the correct extension of .NK2 of course)
4. Start Outlook, and the autocomplete addresses should be there!

These steps assume you have enabled hidden files/folders, and are showing
file extensions in your folder properties.

Jason

"Jason" wrote in message
...
Hello,
I am having an issue that I would imagine others have had too, but I'm
unable to find a solution on the newsgroups or internet. Here is the
situation:

* My old laptop was XP with Outlook 2003
* I have just received a new laptop with Vista and Outlook 2007
* On my old laptop, i have MANY email addresses that are NOT saved as
contacts, but that would auto-fill for me when I began to type their name
in Outlook 2003
* Now on my new laptop, Outlook 2007 doesn't have that same auto-fill list
so I've lost those email addresses

When I moved from Outlook 2003 to 2003 before, I just copied over the .NK2
file and all worked fine (the autofill addresses showed up on the new
machine). Now it appears Outlook 2007 uses a different mechanism and
doesn't recongize/use my old .NK2 file.

Is there anyway possible I can get my autofill list from Outlook 2003 to
my new machine using Outlook 2007? I don't want to have to save these all
as contacts just to migrate them...any ideas?

Jason



  #4  
Old March 16th 07, 05:25 PM posted to microsoft.public.outlook.general,microsoft.public.outlook.contacts,microsoft.public.outlook
Jason
external usenet poster
 
Posts: 7
Default New Machine, from Outlook 2003 to 2007

Thanks Diane...I found my problem was I just assumed the .nk2 was in a
different directory and didn't go hunting in the other folders of appdata.
I got it though...thanks!

Jason
"Diane Poremsky [MVP]" wrote in message
...
I believe it's the same - allow outlook 2007 to create an nk2 file, close
outlook and locate the nk2 then replace it with the old one, making sure
the file name is identical. If not, rename the old one so it replaces the
new one.

Now... if the problem is that outlook doesn't seem to be using any NK2 and
starts with a blank slate everytime, outlook 2007 is not closing properly.
Once it closes completely the NK2 will work when it reopens.

--
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Need Help with Common Tasks? http://www.outlook-tips.net/beginner/
Outlook 2007: http://www.slipstick.com/outlook/ol2007/

Outlook Tips by email:


Outlook Tips:
http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com
Subscribe to Exchange Messaging Outlook newsletter:



"Jason" wrote in message
...
Hello,
I am having an issue that I would imagine others have had too, but I'm
unable to find a solution on the newsgroups or internet. Here is the
situation:

* My old laptop was XP with Outlook 2003
* I have just received a new laptop with Vista and Outlook 2007
* On my old laptop, i have MANY email addresses that are NOT saved as
contacts, but that would auto-fill for me when I began to type their name
in Outlook 2003
* Now on my new laptop, Outlook 2007 doesn't have that same auto-fill
list so I've lost those email addresses

When I moved from Outlook 2003 to 2003 before, I just copied over the
.NK2 file and all worked fine (the autofill addresses showed up on the
new machine). Now it appears Outlook 2007 uses a different mechanism and
doesn't recongize/use my old .NK2 file.

Is there anyway possible I can get my autofill list from Outlook 2003 to
my new machine using Outlook 2007? I don't want to have to save these
all as contacts just to migrate them...any ideas?

Jason





  #5  
Old March 28th 07, 02:50 AM posted to microsoft.public.outlook,microsoft.public.outlook.contacts,microsoft.public.outlook.general
pegg696
external usenet poster
 
Posts: 2
Default New Machine, from Outlook 2003 to 2007

Jason, with your explanation to the above you saved my sanity tonight.

Sir, I thank you.


  #6  
Old April 5th 07, 03:50 PM posted to microsoft.public.outlook,microsoft.public.outlook.contacts,microsoft.public.outlook.general
Word problems
external usenet poster
 
Posts: 2
Default New Machine, from Outlook 2003 to 2007

Jason,

Your solution was perfect! Thank you.

"Jason" wrote:

Never mind, I finally figured it out. For those who need to do the same:

On the XP/Outlook 2003 machine:
1. Navigate to C:\Documents and Settings\username\Application
Data\Microsoft\Outlook
2. Locate the .NK2 file in this directory and copy or move it to the Vista
machine

On the Vista/Outlook 2007 machine:
1. Close Outlook and navingate to
C:\users\username\appdata\roaming\microsoft\outloo k
2. Rename the existing .NK2 file by changing the extension of the filename
(.NK3 for example)
3. Rename the file you moved from the XP machine to be the same as the file
noted in step 2 (with the correct extension of .NK2 of course)
4. Start Outlook, and the autocomplete addresses should be there!

These steps assume you have enabled hidden files/folders, and are showing
file extensions in your folder properties.

Jason

"Jason" wrote in message
...
Hello,
I am having an issue that I would imagine others have had too, but I'm
unable to find a solution on the newsgroups or internet. Here is the
situation:

* My old laptop was XP with Outlook 2003
* I have just received a new laptop with Vista and Outlook 2007
* On my old laptop, i have MANY email addresses that are NOT saved as
contacts, but that would auto-fill for me when I began to type their name
in Outlook 2003
* Now on my new laptop, Outlook 2007 doesn't have that same auto-fill list
so I've lost those email addresses

When I moved from Outlook 2003 to 2003 before, I just copied over the .NK2
file and all worked fine (the autofill addresses showed up on the new
machine). Now it appears Outlook 2007 uses a different mechanism and
doesn't recongize/use my old .NK2 file.

Is there anyway possible I can get my autofill list from Outlook 2003 to
my new machine using Outlook 2007? I don't want to have to save these all
as contacts just to migrate them...any ideas?

Jason




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing pst file from Outlook 2003 (XP Machine) to Outlook 2007 (Vista Machine) - having problems Outish Outlook - General Queries 4 February 7th 07 04:06 PM
Faxing through Outlook 2003 on a Server 2003 machine via VB brendonmoore@gmail.com Outlook - General Queries 1 December 6th 06 09:23 PM
Outlook 2007 hangs machine when exporting contacts to Excel SwampYankee Outlook - General Queries 0 November 28th 06 05:06 PM
Outlook 2007 from one machine to another Kolin Tregaskes Outlook - Using Contacts 3 November 26th 06 06:03 PM
Outllok 2007 from one machine to another Kolin Tregaskes Outlook - General Queries 1 November 26th 06 03:07 PM


All times are GMT +1. The time now is 03:23 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.Search Engine Friendly URLs by vBSEO 2.4.0
Copyright ©2004-2008 Outlook Banter, part of the NewsgroupBanter project.
The comments are property of their posters.
Debt Help - Video Clips - Remortgages - Facebook Proxy - Online Loans