Ok, I couldn't just leave it alone; I like to finish whatever I start.
I found this code:
Dim myOlApp As Outlook.Application
Dim mpfInbox As Outlook.MAPIFolder
Dim obj As Outlook.MailItem
Dim myOlExp As Outlook.Explorer
Dim myOlSel As Outlook.Selection
Set myOlApp = CreateObject("Outlook.Application")
Set mpfInbox = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFo lderInbox)
If mpfInbox.Items(1).Class = olMail Then
Set obj = mpfInbox.Items.Item(1)
MsgBox obj.SenderEmailAddress
End If
This causes a prompt that asks if a user would like to 'Allow Access for x
Minutes'. I thought, ok, good, I’d like to allow access for 1 minute, that's
all it will take to send my emails. I thought the Outlook security prompts
would be disabled for 1 minute, but no, another popup comes up and I have to
'Allow' all the email to be sent just like before, by clicking the 'Yes'
button each time. The code does give me my SMTP server address, right. I
think that’s what it is called.
obj.SenderEmailAddress
Also, to get Excel to cooperate with Outlook, I had to add this line back in:
Set objMessage = CreateObject("CDO.Message")
Well, I guess I made a little progress, but it still doesn’t do what I
envisioned it doing.
Any more suggestions, recommendations, etc.? Sorry for being so thick with
all this stuff.
Ryan---
--
RyGuy
"ryguy7272" wrote:
I’ve tried all sorts of things, but I still don't know how to set the
Message.Configuration details for CDO. Also, I don’t know if I am running
SMPT or not. I know almost nothing about programming Outlook. I just wanted
to help a few people in my office with some tasks around here. I've got it
working for the most part, but I just wanted to try to eliminate those
popups. I am sort of busy with other projects now, so I'll have to come back
to this sometime in the future. Thanks so much, Sue and Paul, for the
valiant effort. I wish I could have gotten it to work, but it doesn't seem
like it is going to happen anytime soon. I’ll take another crack at it
another time.
Regards,
Ryan---
--
RyGuy
"Sue Mosher [MVP-Outlook]" wrote:
Ryan, Paul knows what he's talking about and has documented what you need to know in the article I suggested to you earlier at http://www.paulsadowski.com/WSH/cdo.htm. The problem with your code is that you're still not setting the Message.Configuration details that make it possible for CDO to know what SMTP server address to send through.
You also ought to take out the With OutMail and End With statements, as they're confusing and add nothing to the code.
--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54
"ryguy7272" wrote in message ...
Welcome to the party Paul. I believe there is a way to send multiple emails,
via Outlook, without those warnings popping up every 5 second, but I have
never actually done it. I tried your method, and eliminated all of the
Outlook references, and as far as I can tell now, I rely only on CDO to do
the job, but now I get an error message saying 'The 'Sendusing' configuration
is invalid.'.
Code breaks he
myMail.Send
Entire macro he
Sub Send_Files()
Dim OutMail As Object
Dim sh As Worksheet
Dim cell As Range, FileCell As Range, rng As Range
Set myMail = CreateObject("CDO.Message")
myMail.Subject = "Sending email with CDO"
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Set sh = Sheets("Send Emails")
Set objMessage = CreateObject("CDO.Message")
For Each cell In sh.Columns("B").Cells.SpecialCells(xlCellTypeConst ants)
Set rng = sh.Cells(cell.Row, 1).Range("C1:Z1")
If cell.Value Like "?*@?*.?*" And _
Application.WorksheetFunction.CountA(rng) 0 Then
With OutMail
myMail.To = cell.Value
myMail.Subject = "Sales Reps. Data"
myMail.TextBody = "Hi " & cell.Offset(0, -1).Value
For Each FileCell In rng.SpecialCells(xlCellTypeConstants)
If Trim(FileCell) "" Then
If Dir(FileCell.Value) "" Then
myMail.AddAttachment FileCell.Value
End If
End If
Next FileCell
myMail.Send
End With
Set OutMail = Nothing
End If
Next cell
Set myMail = Nothing
With Application
.EnableEvents = True
.ScreenUpdating = True
End With
End Sub
If anyone can tweak the code and get this thing to work I'd appreciate it.
My CDO ideas came from he
http://www.w3schools.com/asp/asp_send_email.asp
Regards,
Ryan---
--
RyGuy
"Paul R. Sadowski" wrote:
Get rid of all that Outlook stuff. You are using CDO. CDO is independant of
Outlook.
Use ONLY CDO. Your warnings are popping up because you are trying to get
Outlook to send mail. Use only CDO. No Outlook.
"ryguy7272" wrote in message
...
Good site Sue, unfortunately I still get an error...
Error says:
'The SendUsing configuration value is invalid'
This is the line that causes the error:
objMessage.Send
The Object Model Guard pops up again if I change the line to this:
.Send
Below is my full code:
Sub Send_Files()
'Working in 2000-2007
Dim OutApp As Object
Dim OutMail As Object
Dim sh As Worksheet
Dim cell As Range, FileCell As Range, rng As Range
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Set sh = Sheets("Send Emails")
Set OutApp = CreateObject("Outlook.Application")
OutApp.Session.Logon
Set objMessage = CreateObject("CDO.Message")
'Set objMessage = CreateObject("CDO.Message")
For Each cell In
sh.Columns("B").Cells.SpecialCells(xlCellTypeConst ants)
'Enter the file names in the C:Z column in each row
Set rng = sh.Cells(cell.Row, 1).Range("C1:Z1")
If cell.Value Like "?*@?*.?*" And _
Application.WorksheetFunction.CountA(rng) 0 Then
Set OutMail = OutApp.CreateItem(0)
With OutMail
objMessage.Subject = "Example CDO Message"
objMessage.From = "
objMessage.To = cell.Value
objMessage.TextBody = "This is some sample message text."
.To = cell.Value
.Subject = "Sales Reps. Data"
.Body = "Hi " & cell.Offset(0, -1).Value
For Each FileCell In rng.SpecialCells(xlCellTypeConstants)
If Trim(FileCell) "" Then
If Dir(FileCell.Value) "" Then
.Attachments.Add FileCell.Value
End If
End If
Next FileCell
objMessage.Send
End With
Set OutMail = Nothing
End If
Next cell
Set OutApp = Nothing
Set objCDOMail = Nothing
With Application
.EnableEvents = True
.ScreenUpdating = True
End With
End Sub
I am receptive to ideas...
Thanks to all who looked.
Ryan--
--
RyGuy
"Sue Mosher [MVP-Outlook]" wrote:
I don't do CDO for Windows programming. The page at
http://www.paulsadowski.com/WSH/cdo.htm is an excellent reference and
shows how you need to provide configuration information about the SMTP
server to be used for sending the message.
--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54
"ryguy7272" wrote in message
...
I did some editing; still get errors.
Error occurs he
Set .Configuration = cdoConfig
Entire macro:
Sub Send_Files()
Dim OutApp As Object
Dim OutMail As Object
Dim sh As Worksheet
Dim cell As Range, FileCell As Range, rng As Range
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Set sh = Sheets("Send Emails")
Set myMail = CreateObject("CDO.Message")
Set objMessage = CreateObject("CDO.Message")
For Each cell In
sh.Columns("B").Cells.SpecialCells(xlCellTypeConst ants)
Set rng = sh.Cells(cell.Row, 1).Range("C1:Z1")
If cell.Value Like "?*@?*.?*" And _
Application.WorksheetFunction.CountA(rng) 0 Then
With cdoMessage
Set .Configuration = cdoConfig
'.From = ""
.To = cell.Value
.Subject = "Sample CDO Message"
.TextBody = "Hi " & cell.Offset(0, -1).Value
For Each FileCell In
rng.SpecialCells(xlCellTypeConstants)
If Trim(FileCell) "" Then
If Dir(FileCell.Value) "" Then